TORCH-P4538
| Work flashlight |
| - Light source: LED 10+1 |
| - Maximum light output: 700 lm |
| - Duration of operation: 3-6 hours |
| - Maximum beam distance: 45 m |
| - Power supply: Li-Ion 1200mAh |
| - Built-in magnets |
| - Material: ABS plastic + rubber |
| After pressing the ON/OFF button during lighting |
| the BOOST function is activated |
| which increases the lighting power of the lamp for 30 seconds. |
| Then the lighting power decreases to the initial value;If you want to turn off the lamp |
| hold the ON/OFF button for 3 seconds. |
| Charging the battery |
| Charge the battery before first use;The battery discharges spontaneously |
| which is why it must be recharged at least 3 times a month |
| to prevent voltage drop and possible damage. |
| The charging status of the battery is indicated by 4 color LED diodes;As soon as the battery of the work torch is almost discharged |
| only one LED lights up;During charging |
| the second LED and the third LED light up gradually;When all 4 LEDs light up |
| the battery of the work torch is fully charged and can be disconnected from the power source. |
| Warning |
| - The new lamp must be charged before use |
| - The lamp battery must be kept charged |
| to prevent the voltage from falling below the limit level;For this reason |
| we recommend charging at least once every 3 months |
| even if not once use;The charging temperature of the flashlight is from +5 °C to +45 °C. |
| - In case the lamp does not illuminate or illuminates weakly |
| it must be charged immediately. |
| - In case of damage or destruction of the battery during the warranty period of the lamp (battery) due to non-compliance with the mentioned rules |
| the complaint will not be accepted. |
| - Charge the lamp in dry indoor spaces. |
| - Do not throw the lamp or the battery into fire |
| do not disassemble or short-circuit them. |
| - This device cannot be used by children and people whose physical |
| sensory or mental capacity |
| or insufficient experience and knowledge prevent its safe use |
| if they are not supervised by the person responsible for their safety. |
| - Keep the lamp out of the reach of children;Do not throw electrical consumers in unsorted municipal waste |
| use the reception bases for sorted waste;For current information on the reception bases |
| contact the local authorities;If electrical consumers are stored at municipal waste stocks |
| dangerous substances can infiltrate into the groundwater and reach the food chain |
| endangering your health. |
| Packaging: blister 1 pc. |
Excelent
