Top
Brands
Ghimbav, Brașov Contact Contul meu Coșul meu Asistență IT Showroom B2BPrețuri B2B pentru compania ta
ELECTROCASNICE MICI
  Accesorii aspiratoare (50)   Accesorii expresoare (3)   Expresoare (50)   Mixere (39)   Blendere (83)   Prajitoare paine (38)   Friteuze (46)   Gratare electrice (28)   Aspiratoare (284)   Fiare de calcat (105)   Accesorii bucatarie (1160)   Alte aparate uz casnic (2)   Cuptoare cu Microunde (51)   Roboti bucatarie (125)   Masini de tocat carne (7)   Masini de facut paine (5)   Aparate de Tuns / Trimmere (104)   Epilatoare (23)   Placi de indreptat parul (57)   Statii de calcat (2)
DESKTOP PC
  All-in-One PC (249)    all-in-one     aio i5   Sisteme Desktop (752)   Stabilizatoare de tensiune (1)   Invertoare (37)
LAPTOPURI & ACCESORII
  Laptop-uri (1507)    macbook pro    laptop i7 lenovo    laptop dell latitude    macbook m4    laptop dell i7    lenovo thinkpad   Memorii RAM laptop (224)   HDD-uri Laptop (5)   Genti Laptop (408)   Incarcatoare laptop (234)   Tastaturi Laptop (3)   Stand & Cooling pad (62)   Baterii laptop (11)   Power Bank (13)   Card Reader (57)   Docking stations (341)
SERVERE
  Server (230)    server dell    server tower    server hp    server rack    dell r450    server 8c    server 12c   Procesoare server (106)   Memorii server (119)   Placi de baza server (22)   Hard Disk-uri Server (184)   SSD-uri Server (163)   Sisteme de operare server (29)   Carcase server (13)   Surse de alimentare server (19)   Riser server (1)   Storage Controller (10)   Cabluri si Adaptoare server (11)   Heatsink server (8)   Retelistica server (14)   Optiuni Servere (306)   Accesorii server (130)   Coolere, radiatoare server (31)   Organizatoare cabluri (98)
RETELISTICA
  Access point & Range Ext. (222)   Telefon fix (18)   Sine Rack Server (4)   Rackuri & Cabinete (599)   Accesorii rackuri (186)   Patch Panel (59)   Accesorii Retelistica (2448)   Switch-uri (1266)   Switch-uri KVM (256)   Switch (91)   Routere & Wireless (979)   Adaptoare retea (61)   Antene (236)   Placi de retea (287)   PowerLine (20)   Media convertoare (151)
COMPONENTE PC
  Placi video (318)    rtx 3060    rtx 3080    rtx 4090   Procesoare (205)   Placi de baza (464)   Memorii RAM desktop (493)   SSD-uri (492)    ssd samsung   Hard Disk-uri Desktop (36)   DVD Writer (40)   Placi de captura si tunere TV (4)   Placi de sunet (19)   Carcase (596)   Surse PC (407)   Coolere procesor (234)   Ventilatoare carcasa (283)   Paste Termice (126)   Accesorii sisteme racire (306)   Accesorii & alte componente PC (1099)   IT (8476)
NAS SI SOLUTII
  Network Attached Storage (95)   HDD-uri NAS (61)   SSD-uri NAS (21)   Memorii NAS (10)   Componte / accesorii NAS (40)
PERIFERICE PC
  Casti (1295)   Microfoane (151)   SSD-uri externe (93)   Rack-uri externe USB (42)   Monitoare (1270)   Tastaturi (917)   Hub-uri USB (286)   Kit mouse tastatura (217)   Mouse (1059)   Hard Disk-uri externe (281)   Mouse Pad (220)   Camere web (177)    webcam logitech   Memorii USB (355)
IMPRIMANTE, SCANERE & CONSUMABILE
  Tonere imprimante laser (385)   Imprimante 3D (71)   Accesorii imprimante (42)   Imprimante termice (382)   Imprimante si multifunctionale (541)   Fax (1)   Scanere (129)   Cartuse, tonere si alte consumabile (4019)   Alte consumabile (27)
×
           Adauga o companie
Store Business Servere Showroom
 
0368 803 539

Contact

Asistență IT

Articole recomandate care v-ar putea plăcea

Patch cord UTP UTP Cat5e nu 20 m galben cupru AWG26 nu
Livrare rapidă

Patch cord UTP UTP Cat5e nu 20 m galb...

113.59 lei

AC power supply with 2xUSB-C (USB3.1) + USB3.0 PD 3.0 65W plug, black with 3 travel adapters - SUPER FAST CHARGE - Input: 100-240V 50/60Hz - USB-C1: 3.3V-20V:3A, 5V:3A, 9V:3A, 12V:3A, 15V 3A, 20V:3.25A (65W max) - USB-C2: 3.3V-20V:3A, 5V:3A, 9V:3A, 12V:3A, 15V 3A, 20V:3.25A (65W max) - USB3.0: 3.3V-10V:3A, 5V:3A, 9V:3A, 12V:2.5A, 15V 2A, 20V:1.5A (30W max) USB-C1+USB-C2=45W+20W (65W) USB-C1+USB3.0=45W+18W (63W) USB-C1+USB-C2+USB3.0=45W+10W+10W (65W) Packaging: box 1 set
Livrare rapidă

AC power supply with 2xUSB-C (USB3.1)...

115.50 lei

The ZD-99 Soldering Station is the perfect tool for hobbyists and students doing electronic work. It features a compact design and a power switch with an indicator light. The temperature range of the station is 150 - 450&ampdegC, making it perfect for various soldering tasks. The short warm-up time and temperature selection with rotary control make the ZD-99 soldering station easy to use. The device also features a protective conductor for safe operation. With its easy-to-change tips, the ZD-99 Soldering Station is a convenient tool for anybody looking for a great-value for money entry soldering station. The ZD-99 complies with all EU safety standards. ZD-99 Soldering Station Features: &ampnbsp&ampnbsp&ampnbsp Entry soldering station for general electronic and electrical work. &ampnbsp&ampnbsp&ampnbsp Perfect for hobby, school and service &ampnbsp&ampnbsp&ampnbsp Compact design &ampnbsp&ampnbsp&ampnbsp T&ampuumlv-certified quality &ampnbsp&ampnbsp&ampnbsp Power switch with indicator light. &ampnbsp&ampnbsp&ampnbsp Temperature range 150 - 450&ampdegC &ampnbsp&ampnbsp&ampnbsp Short warm-up time &ampnbsp&ampnbsp&ampnbsp Temperature specification with rotary control &ampnbsp&ampnbsp&ampnbsp Easy and fast change of tip &ampnbsp &ampnbsp Soldering hammer 48 W Packaging: box 1 pc.
Livrare rapidă

The ZD-99 Soldering Station is the pe...

116.87 lei

SMPS power supply (switching power supply) AC/DC 12V 10A (10000mA) with 5.5x2.5mm plug - input voltage: 230V AC - output voltage: 12V DC Packaging: bulk 1 pc.
Livrare rapidă

SMPS power supply (switching power su...

118.38 lei

Soldering gun for tin, fludor, power 75W - it is powered at 230V AC - the set also contains 5 spare tips Packaging: blister 1 pc Destination: The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin. Spare parts: Soldering loops can be purchased in stores with electrical installation materials. Warning: Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket. Liquidation: Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

121.11 lei

ELPMB63 - Finger Touch Wall Bracket for ELPFT01
Livrare rapidă

ELPMB63 - Finger Touch Wall Bracket f...

123.78 lei

Soldering gun for tin, fludor, power 75W - it is powered at 230V AC - the set also contains 5 spare tips Packaging: blister 1 pc Destination: The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin. Spare parts: Soldering loops can be purchased in stores with electrical installation materials. Warning: Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket. Liquidation: Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

127.95 lei

Soldering gun for tin, fludor, power 100W - it is powered at 230V AC - the set also contains 5 spare tips Packaging: blister 1 pc Destination: The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin. Spare parts: Soldering loops can be purchased in stores with electrical installation materials. Warning: Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket. Liquidation: Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

136.71 lei

Soldering gun for tin, fludor, power 125W - it is powered at 230V AC - the set also contains 5 spare tips Packaging: blister 1 pc Destination: The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin. Spare parts: Soldering loops can be purchased in stores with electrical installation materials. Warning: Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket. Liquidation: Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

140.68 lei

Soldering gun for tin, fludor, power 100W - it is powered at 230V AC - the set also contains 5 spare tips Packaging: blister 1 pc Destination: The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin. Spare parts: Soldering loops can be purchased in stores with electrical installation materials. Warning: Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket. Liquidation: Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

143.56 lei

Work flashlight - Light source: COB LED + LED - Maximum light output: 800 lm - Duration of operation: 2.5-7 hours - Maximum beam distance: 35 m - Power supply: Li-Ion 2000mAh - Built-in magnets - Material: plastic - IP54 Packaging: box 1 set Quick Switch-off Function This function will make switching off a Work Light with multiple lighting modes much easier. Simply use whichever lighting mode you need and then turn off the Work Light when you&#39re done with a single button press &ampndash no need to go through all the remaining lighting modes to turn the Work Light off. 1. Turn on the Work Light. 2. Choose the lighting mode that suits you best. 3. The quick switch-off function automatically activates if the Work Light remains in the same lighting mode for 10 seconds. 4. Afterwards, another press of the button automatically turns the Work Light off (skips the other lighting modes). Rechargeable Battery Protection A product with this function features protective circuits that prevent both overcharging and excessive discharging of the accumulator that could lead to high temperatures, sparking or explosion that would irreversibly damage or destroy the product. Charging the Accumulator If the battery is charging, one of the four LEDs on the back of the flashlight flashes. Once the battery is charged, all four LEDs light up at once. Attention &ampbull When new, the Work Light must first be charged before use. &ampbull The Work Light&amprsquos accumulator must be kept charged to prevent the voltage from dropping below the threshold level. Therefore, it is recommended to recharge the Work Light at least once every 3 months even when it is not being used. Temperature for lamp charging +5 &ampdegC to +45 &ampdegC. &ampbull The lighting time is given as the time during which the light output drops to the limit of 0.25 lx at a distance of 2 m. &ampbull If the Work Light does not light up or the light is weak, recharge it immediately. &ampbull If the accumulator is damaged or destroyed due to non-observance of the above rules, complaints filed within the warranty period regarding the Work Light (accumulator) will not be accepted. &ampbull Recharge the Work Light in dry indoor areas. &ampbull Do not throw the Work Light or the accumulator into a fire and do not disassemble or short-circuit it. &ampbull This device is not intended for use by children or persons whose physical, sensory or mental disability or lack of experience and expertise prevents safe use, unless they are supervised by a person responsible for their safety. &ampbull Keep the Work Light out of reach of children.
Livrare rapidă

Work flashlight - Light source: COB L...

145.75 lei

Soldering gun for tin, fludor, power 125W - it is powered at 230V AC - the set also contains 5 spare tips Packaging: blister 1 pc Destination: The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin. Spare parts: Soldering loops can be purchased in stores with electrical installation materials. Warning: Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket. Liquidation: Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

147.52 lei


Organizator spiralat cabluri 23 - 150mm, black, (20m) - ELEMATIC

Organizator spiralat cabluri 23 - 150mm, black, (20m) - ELEMATIC

Organizator spiralat cabluri 23 - 150mm, black, (20m) - ELEMATIC
Organizator spiralat cabluri 23 - 150mm, black, (20m) - ELEMATIC



Branduri de top din categoria Accesorii Retelistica:

Descriere


mai mult

Specificații produs


Organizator spiralat cabluri 23 - 150mm, black, (20m) - ELEMATIC

Referintă: 505439
SKU: SP 25N
Compară:
11108
TVA inclus 91.80RON
18.03€
În stoc (7buc)
Livrare până în 28 ianuarie

Preț NET: 91,8 RON [18,03 €]
Mai multe informații, te rog
Cere detalii
Solicită publicarea în catalogul electronic SICAP
Te notificam imediat ce articolul va fi publicat!
Garanție:  12 luni
Comercializat din 22/09/2025
Ridică din Alege Easybox
Cost transport 19.00 lei
Toate prețurile includ TVA

Compară  

Poduse similare :
Extreme Networks 10051H Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver Module
În stoc (4buc)
Livrare până în 10 februarie


10614 lei 20.84€
     

Cap terminal UTP pentru cleste sertizat 31.0011 - Molex
În stoc (1buc)
Livrare până în 28 ianuarie


10624 lei 20.86€
     

LANBERG PCU5-20CC-0200-S Lanberg Patchcord RJ45 cat. 5e UTP 2m Gray, 10-Pack
În stoc (9buc)
Livrare până în 28 ianuarie


10640 lei 20.89€
     

DIGITUS CAT 6A S-FTP patch cable Cu LSZH AWG 26/7 length 15 m color grey
În stoc (1buc)
Livrare până în 3 februarie


10644 lei 20.90€
     

PLANET 8-Pin A-Coding M12 male to cabluri de rețea 2 m
Stoc suficient
Livrare până în 28 februarie


10625 lei 20.86€
     

Ubiquiti Networks UACC-CABLE-PATCH-OUTDOOR-3M-W cabluri de rețea Alb Cat5e S/UTP (STP)
În stoc (11buc)
Livrare până în 28 ianuarie


10766 lei 21.14€
     

Diblu nylon + holsurub E 6 x 30mm - ELEMATIC
În stoc (5buc)
Livrare până în 28 ianuarie


10863 lei 21.33€
     

MODUL SFP TP-LINK Single-mode, conector LC, 1000Base-BX WDM Bi-Directional, TX:1310nm/RX:1550nm, pana la 2km TL-SM321B-2
În stoc (5buc)
Livrare până în 30 ianuarie


10912 lei 21.43€
     

EVOLVE 75E EARGELS AND EARWINGS/INCLUDES 3 EG AND 3 EW
Stoc suficient
Livrare până în 30 ianuarie


10932 lei 21.47€
     

LANBERG Lan Cable 1gb/s 100m Solid CCA Grey
În stoc (4buc)
Livrare până în 24 ianuarie


10984 lei 21.57€
     

MIKROTIK S-31DLC20D SFP Module 1.25Gb/s 1310nm 2x LC 20km Single mode
Stoc epuizat


PRP:11001 lei  10045 lei 19.72€
     

MODUL SFP TP-Link 1000BASE-T RJ45 SFP TL-SM331T
Stoc suficient
Livrare până în 22 ianuarie


PRP:11021 lei  10062 lei 19.76€
     

SFP bidireccional compatible con Cisco GLC-BX-10D 1000BASE-BX 1550nm-TX/1310nm-RX 10km DOM
În stoc (1buc)
Livrare până în 30 ianuarie


11053 lei 21.70€
     

GLC-BX40-D Compatible 1000BASE-BX-D BiDi SFP 1550nm-TX/1310nm-RX 40km DOM Simplex LC SMF Transceiver
În stoc (1buc)
Livrare până în 30 ianuarie


11066 lei 21.73€
     

Compatible Huawei 1000BASE-T SFP Copper RJ-45 100m Transceiver Module
În stoc (10buc)
Livrare până în 30 ianuarie


11066 lei 21.73€
     

HW Compatible Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) / HW Compatible E
În stoc (4buc)
Livrare până în 30 ianuarie


11066 lei 21.73€
     

Poly Supraplus Encore Tristar Voice (1 Piece)
Stoc suficient
Livrare până în 29 ianuarie


11142 lei 21.88€
     

Lanberg NT-0402 network cable tester PoE tester Blue, White
În stoc (1buc)
Livrare până în 28 ianuarie


11156 lei 21.91€
     

Lanberg NT-0104 cable stripper Black, Blue
În stoc (4buc)
Livrare până în 28 ianuarie


11163 lei 21.92€
     

Extralink Amaris | Fiber Optic Junction Box | 8 welds
Stoc suficient
Livrare până în 4 februarie


11190 lei 21.97€
     

Modul TP-Link, Modul Mini-GBIC SFP to 1000BaseSX, 550 m, Multi Mode, LC
În stoc (4buc)
Livrare până în 30 ianuarie


11257 lei 22.10€
     

TP-LINK Gigabit SFP module Single-mode MiniGBIC LC interface Up to 10km distance
În stoc (3buc)
Livrare până în 30 ianuarie


11265 lei 22.12€
     

ATEN 2X-EA12 cabluri cu sistem de blocare Galben
În stoc (15buc)
Livrare până în 11 februarie


11268 lei 22.12€
     

HPE 1U Gen10 4LFF SAS Internal Cable Kit
În stoc (1buc)
Livrare până în 11 februarie


11272 lei 22.13€
     

Tub termocontractibil 25,4 / 12,7mm ET100, negru (6buc)- ELEMATIC
În stoc (4buc)
Livrare până în 28 ianuarie


11275 lei 22.14€
     

QuWireless SIMNN adaptoare pentru memorii de tip SIM/flash Adaptor card SIM
În stoc (10buc)
Livrare până în 10 februarie


11280 lei 22.15€
     

Tub termocontractabil 9,5 / 4,8 mm, ET100 , albastru (20buc)- ELEMATIC
În stoc (5buc)
Livrare până în 28 ianuarie


11303 lei 22.19€
     

Tub termocontractabil 9,5 / 4,8 mm, ET100 , rosu -ELEMATIC
În stoc (4buc)
Livrare până în 28 ianuarie


11303 lei 22.19€
     

Mufa BNC tata cu prindere in suruburi
În stoc (5buc)
Livrare până în 28 ianuarie


11314 lei 22.22€
     

Tub termocontractabil 6,4 / 3,2 mm ET100, albastru (24buc)- ELEMATIC
În stoc (1buc)
Livrare până în 28 ianuarie


11347 lei 22.28€
     

Tub termocontractabil 4,8 / 2,4 mm ET100, albastru (24buc)- ELEMATIC
În stoc (3buc)
Livrare până în 28 ianuarie


11347 lei 22.28€
     

Tub termocontractabil 4,8 / 2,4 mm ET100, rosu (24buc)- ELEMATIC
În stoc (5buc)
Livrare până în 28 ianuarie


11347 lei 22.28€
     

4,6/5 63 reviews

  •    126 zile,6 ore si 58 minute

    Am achiziționat de la URY STORE un Server DELL PowerEdge T160 cu o configurație de top: procesor Intel Xeon E-2488, 2 x SSD Samsung de 1TB, placă video RTX A400 LP 4GB cu 4 x mini DisplayPort, într-un format Smallbox ideal pentru spații restrânse. Performanța este remarcabilă — serverul rulează fără probleme sarcini complexe, fiind perfect pentru medii de virtualizare, dezvoltare software și aplicații grafice. Livrarea a fost rapidă și fără incidente, iar produsul a fost ambalat cu grijă, ajungând în stare impecabilă. Ce m-a impresionat cu adevărat a fost nivelul de suport oferit de echipa URY STORE: comunicare clară, promptitudine și disponibilitate pentru orice întrebare tehnică. Este evident că URY STORE pune accent pe calitate, atât în ceea ce privește produsele, cât și serviciile. Într-un domeniu în care fiabilitatea și suportul tehnic sunt esențiale, URY STORE reușește să ofere o experiență completă și de încredere. Recomand cu toată încrederea acest magazin tuturor celor care caută echipamente IT performante și servicii profesionale. Cu siguranță voi reveni pentru viitoare achiziții!

    Stefan-Mihai Moga
  •    154 zile,13 ore si 7 minute

    Foarte multumit de interactiunea cu magazinul. Dl Cristian a fost extrem de amabil si maleabil. Tot procesul de achizitie echipamente a mers snur. Recomand!

    Radu Adrian
  •    239 zile,2 ore si 46 minute

    Ury store,un magazin foarte bun,orice problema intampinati,...,domnul administrator rezolvă Achizitionasem un laptop Asus Vivobook.Acumulatorul era mort.De nou.Am contactat firma prin dna Stela Janko si,imediat,au trimis Cargus curier ,au preluat laptopul si in cateva zile mi l au adus cu alt acumulator instalat in service ul dlor.Nu m a costat nimic.Apoi,deoarece acest laptop nu are nimic pe el si se instaleaza mai greu windows si office ul microsoft ,am tot scris pe wh si am sunat la dl administrator.Explcandu i situaitia mea,ca am luat acest laptop din banii de prima de cariera didactica si ca nu am laptop si nu stiu sa instalez sistem dr operare pe el,a trimis Sameday ,l au preluat si,in cateva zile,mi l au trimis inapoi cu toate instalate...si nici un ban nu mi au cerut ..au platit si curier fan courier inapoi...Deci,oamenii,dl administrator indeosebi,sunt Oameni si chiar daca s a strecurat o mica greseala de acumulator initial,au indreptat o cu varf si indesat,indatorându mă...lucru pentru care ,le MULTUMESC frumos si ii felicit.Va doresc spor si succes,Ury Store! Viata indelungata cu sanatate!

    NARCISA IONESCU
  •    240 zile,11 ore si 12 minute

    Am achiziționat un Invertor volt polska sinus pro ultra hv6000 Comunicare super, livrare super, momentan aparatul funcționează cum trebuie. Bravo !

    Doru Ionescu
  •    254 zile,11 ore si 9 minute

    Mi s a dat un laptop refurbished cu acumulator mort ,desi am platit la pret de nou ...mi s a preluat cu Cargus si inlocuit acumulatorul.Solicit sa schimb acest laptop cu alt model,sper nou ..1700 lei si mi se inchide brutal telefonul de catre angajatul lor de whatsapp...care nu discuta prin mesaje,doar cu apel...e GROAZNIC! NU CUMPARATI DE LA EI

    NARCISA IONESCU
  •    257 zile,12 ore si 14 minute

    Am achiziționat recent un laptop de gaming de la Ury Store și sunt extrem de mulțumit atât de produs, cât și de serviciile oferite. Personalul a fost foarte amabil și bine informat, răspunzând cu răbdare la toate întrebările mele și oferindu-mi recomandări utile în funcție de nevoile mele. Laptopul a fost livrat rapid, ambalat impecabil, iar produsul corespunde în totalitate descrierii de pe site. Funcționează perfect, performanțele sunt excelente și se vede că este un produs de calitate. Apreciez în mod deosebit comunicarea promptă și profesionalismul echipei. Este clar că pun accent pe satisfacția clientului. Cu siguranță voi reveni pentru viitoare achiziții și recomand acest magazin tuturor celor care caută echipamente IT de încredere!

    Eduard Serdaru
  •    279 zile,8 ore si 40 minute

    Am avut o experiență foarte plăcută cu această firmă! Am comandat o imprimantă și am fost impresionat de promptitudinea livrării — totul a decurs rapid și fără probleme. Personalul a fost foarte amabil și profesionist, oferindu-mi toate informațiile de care aveam nevoie. Se vede că este o firmă serioasă, care pune accent pe calitatea serviciilor oferite. Recomand cu încredere!

    Costel Lazar
  •    322 zile,12 ore si 2 minute

    Am cumparat un laptop HP, multumita de produs si de interactiunea cu cei de la URY STORE. Oameni seriosi, saritori, m-au ajutat cu tot ce am avut nevoie!

    Gabriela Chicu
  •    323 zile,6 ore si 59 minute


    Márk Szőke
  •    323 zile,8 ore si 24 minute

    Servicii profesioniste, echipamente de calitate. Recomand!

    CODRUT CHERESTES
  •    323 zile,8 ore si 42 minute


    adrian stefanescu
  •    458 zile,o ora38 minute

    Recomand cu incredere URY STORE. Servicii impecabile, comunicare foarte buna, produse livrate la timp. Mult succes cu business-ul!

    YNWA7
  •    488 zile,12 ore si 17 minute


    Movileanu Alin
  •    510 zile,5 ore si 41 minute

    Am fost placut surprins de interactiunea cu personalul magazinului. Comanda s-a derulat normal, produsul ajuns cu bine. Marele atu este ca au produse care nu sunt aduse de alte magazine din tara noastra.

    Gheorghe Muraru
  •    512 zile,6 ore si 15 minute


    Duotonina
  •    530 zile,6 ore si 45 minute

    Servicii de nota 10. Am achiziționat un o imprimanta multifuncțională și sunt foarte mulțumită atat de produs, cât și amabilitatea și promptitudinea personalului.

    nicoleta Bimokono
  •    530 zile,22 ore si 26 minute


    Marsel Bega
  •    531 zile,11 ore si 36 minute


    Iulian Pana
  •    546 zile,12 ore si 8 minute

    Cooperare excelenta!

    Hobby King
  •    554 zile,9 ore si 50 minute

    Foarte prompți și serviabili ! Laptopul încă nu l-am primit, dar serviciile au fost ireproșabile.

    Ioan Neamtu

Linkuri utile

ssd samsung all-in-one rtx 3060 webcam logitech server hp server dell server rack server 12c server tower laptop i7 lenovo