SOLDER GUN PLB100W
| Soldering gun for tin |
| fludor |
| power 100W |
| - it is powered at 230V AC |
| - the set also contains 5 spare tips |
| Packaging: blister 1 pc |
| Destination: |
| The transformer soldering gun is designed for soldering small components;It is especially recommended for soldering connections in electrotechnics |
| where the soldered components will not be damaged by the resistance heat of the soldering loop;It is a compact device |
| in accordance with the regulations valid during its manufacture and approved for operation by the national verification center;The transformer with nickel terminals of the secondary is deposited in the plastic case;The soldering loop is fixed on their ends with the help of M3 screws;Operation is controlled using the microswitch button;In the case |
| under the terminals of the secondary |
| is the LED diode;The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m;The use: Before putting into operation |
| the handle must be adjusted in the right working position;During this action |
| the soldering gun must be disconnected from the electrical network;After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection) |
| the device is ready for use;By pressing the button of the soldering gun |
| it is put into operation;At the same time |
| the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area;The sticking time - button contact is 10 seconds |
| the rest period until the next start is 30 seconds;This cycle must be respected in order not to overload the transformer;Before the first gluing |
| it is recommended to dip the hot handle in rosin;When using the tubular tin (max;Ø ±3 mm) dipping is not necessary |
| being filled with rosin. |
| Spare parts: |
| Soldering loops can be purchased in stores with electrical installation materials. |
| Warning: |
| Use the soldering gun only at the voltage mentioned on the label and in the instructions;Before the first start-up |
| check the condition of the power cable |
| so that it is not damaged;This check must be repeated before every other use |
| or in case of suspicion of damage due to incorrect handling;Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron;For all actions - replacing the handle |
| checking the power cable |
| etc;the soldering gun must be without voltage |
| the plug removed from the socket. |
| Liquidation: |
| Liquidate the product according to the valid regulations and orders |
| i.e;hand over the packaging and electrical devices to the places designated for this purpose;All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications |
| or by the manufacturer;This appliance can be used by children aged 8 years and older and the elderly or with reduced physical |
| mental and sensory capabilities or with insufficient experience and knowledge |
| only if they are supervised or have been instructed in the safe use of the appliance;the consumer and understand possible dangers;It is forbidden for children to play with this consumer;Cleaning and maintenance by the user cannot be performed by children without supervision. |
Excelent
